2022.01.13 14:43:59.327 NAS100,M1: 3805 tick events (15 bars, 40582201 bar states) processed in 0:00:12.984 (total time 0:00:13.531)
2022.01.13 14:43:59.325 2021.12.01 00:14:47 vwi_TVf1m_v.4.16 OnTester returns 1.00000000000000
2022.01.13 14:43:59.325 2021.12.01 00:14:47 Tester: order #1 is closed
2022.01.13 14:43:59.325 2021.12.01 00:14:47 vwi_TVf1m_v.4.16: tester cannot calculate prices
2022.01.13 14:43:59.325 2021.12.01 00:14:47 vwi_TVf1m_v.4.16 NAS100,M1: Alert: NAS100: Trade opened. (Order id: 1)
2022.01.13 14:43:59.325 2021.12.01 00:14:47 vwi_TVf1m_v.4.16 NAS100,M1: open #1 sell 1.99 NAS100 at 16220.43900 sl: 16246.17493 tp: 16005.97310 ok
2022.01.13 14:43:59.318 2021.12.01 00:14:47 vwi_TVf1m_v.4.16 NAS100,M1: Alert: TRD: open: NAS1001l:1.99(16220.439)5s:16246.17493t:16005.9731m:20012623 ln: 713
2022.01.13 14:43:59.318 2021.12.01 00:14:47 vwi_TVf1m_v.4.16 NAS100,M1: Alert: doAction Entry: 16220.43900; SL: 16246.17493; TP: 16005.97310; model: 26
2022.01.13 14:43:48.164 2021.12.01 00:06:00 vwi_TVf1m_v.4.16 NAS100,M1: End Negate (-2) at 2021.12.01 00:06:00
2022.01.13 14:43:46.532 2021.12.01 00:00:00 vwi_TVf1m_v.4.16 NAS100,M1: Start Negate (-2) at 2021.12.01 00:00:00
Error is there a work around (Cannot calculate prices)
Re: Error is there a work around (Cannot calculate prices)
Hi Art,
When you get "Cannot calculate prices" error, it usually means that your MT4 symbol settings are incorrect. Make sure you have gone to File->Export to MT4->Metatrader Info->Map To and select the correct symbol from your MT4 broker that you are referring/mapping to. This process of selection will automatically get the correct symbol settings and should resolve the error.
Please see this thread for more information.
Thanks.
When you get "Cannot calculate prices" error, it usually means that your MT4 symbol settings are incorrect. Make sure you have gone to File->Export to MT4->Metatrader Info->Map To and select the correct symbol from your MT4 broker that you are referring/mapping to. This process of selection will automatically get the correct symbol settings and should resolve the error.
Please see this thread for more information.
Thanks.